Chamblee properties run the full range of HVAC needs, from a single capacitor swap on a system that is otherwise sound to a complete tear-out and replacement of equipment that has simply run its course. We handle both ends and everything in between, for homes, rental units, and commercial spaces across the city.
Call us at (470) 995-4495, seven days a week from 7:30 AM to 9:00 PM.
Whether the call is about a furnace that stopped firing, an air conditioner that runs all day without cooling the house, or a ductless mini-split that needs a new home in an addition, the process is the same. You describe what the property is doing, the job gets scoped on the phone, and the price is confirmed before anything is scheduled. That is how every visit starts, regardless of what it turns out to involve.
Most people replace a thermostat because the old one stopped working. That is a reasonable trigger, but it undersells what a modern control actually does. A programmable or smart thermostat does not just set the temperature. It adjusts the schedule around occupancy, catches drift before it becomes a comfort problem, and gives the system a way to run more efficiently across the day rather than cycling on and off in response to a single reading.
An older mechanical thermostat can make a well-functioning system behave poorly. If the room temperature never quite matches what the dial says, or the system overshoots and then runs again almost immediately, the thermostat is worth looking at before anything else. Replacing it is a contained job that does not require touching the equipment itself, and it sometimes resolves a complaint that was about to become a much larger repair call.
HVAC work like this is the bulk of what a season brings, and the calls we take in Chamblee reflect a city where housing stock varies widely and systems are at different stages of their useful life.
The region's summers push humidity into the house even when the air conditioner is keeping up with the temperature. When the indoor air feels heavy or damp at a setting that should be comfortable, the cooling system is doing its job and the humidity is doing its own thing alongside it. A whole-home dehumidifier integrates with the existing system and manages moisture independently of the cooling cycle. On the heating side, forced-air furnaces dry the air out, and a whole-home humidifier addresses that without requiring a portable unit in every room.
A system that heats or cools unevenly across a building is not always a broken system. Registers that have never been balanced for the actual layout, dampers that were set and forgotten, or ductwork that was designed for a different floor plan can all produce the same symptom: one room comfortable, another too hot or too cold. Rebalancing addresses the airflow distribution rather than the equipment, and it is often the right answer before a compressor or blower motor gets blamed for something that is actually a duct problem.
A heat pump that stops heating in cold weather, ices over on the outdoor coil, or switches modes but does not deliver temperature change is showing a fault that needs a proper diagnosis before any part is touched. Defrost cycle problems are among the more common causes of a heat pump that appears to be running but is not performing. Refrigerant level, reversing valve operation, and defrost controls are all checked before a verdict is given. Heat pump installation is also handled for properties moving away from a gas furnace or adding a ductless zone.
The air handler is where the heating or cooling is actually distributed, and a blower motor that is wearing out makes the whole system less effective regardless of how well the outdoor unit is performing. Reduced airflow, unusual sounds during operation, or a system that takes longer than it used to reach the set temperature are all worth a call. A service visit covers the motor, the wheel, the coil condition, and the drain pan, so the diagnosis is complete before any repair is quoted. Most of what comes up before a visit is answered on the heating and cooling services page.
The honest answer is that the cost depends on what the job turns out to be. A refrigerant recharge, a blower motor replacement, and a full system installation are very different conversations, and quoting a number without knowing which one applies would not be useful to anyone.
What moves a quote is straightforward. The fault itself, what has to be accessed to reach it, the age and type of the equipment, and whether a repair makes more sense than a replacement are the main factors. When a system is old enough that a significant repair puts money into equipment that is likely to need another repair soon, that conversation happens before any work is authorized.
Staying ahead of HVAC problems keeps your home comfortable and keeps repair costs from compounding. A tune-up visit that catches a failing component before it causes a shutdown costs less than the same repair done under emergency conditions. When you call, the job gets scoped on the phone and the price is confirmed before the visit is booked. Ask what the rate covers and you get a straight answer.
The sooner you call, the sooner your comfort is back, and a clear conversation on the phone is what makes the visit go smoothly. You describe what the system is doing, and the scope of the visit is established before anything is scheduled. That applies to routine maintenance calls and to situations where the heat or cooling has gone out entirely.
A no-heat or no-cooling situation is handled the same way as any other call: scoped on the phone, priced before the visit is booked, and scheduled once the scope and rate are agreed.
We are available every day from 7:30 AM to 9:00 PM at (470) 995-4495, and emergency calls are taken during those hours.
For rental properties and commercial spaces, timing matters beyond the repair itself. A tenant who cannot be without heat overnight or a business that needs to stay open during a service visit are situations worth mentioning on the call. The visit is scoped with that in mind, and the technician who comes out knows what the constraints are before arriving.
A system that is mechanically sound but cannot hold a consistent temperature across the property is often a duct problem. Leaking connections, separations in flex duct, or sections that were never properly sealed let conditioned air escape before it reaches the rooms it is meant to serve. The equipment runs longer to compensate, energy costs climb, and the rooms furthest from the air handler are the ones that feel it most.
Duct sealing and repair do not require pulling walls apart. A duct inspection identifies where the losses are and what it would take to address them. In some cases, rebalancing the airflow distribution is enough. In others, sections of ductwork need to be sealed, replaced, or rerouted. The HVAC work done properly, start to finish, means the duct system gets the same attention as the equipment it connects to, because a well-maintained unit moving air through a leaking duct is not performing the way it should.
We cover Chamblee and the surrounding area throughout DeKalb County and the neighboring communities. That includes Brookhaven, Doraville, Dunwoody, North Druid Hills, and North Decatur. Calls from any of these areas are handled the same way: the job is scoped on the phone and the price is confirmed before anyone is scheduled.
Commercial rooftop units are covered as well as residential systems, and the same availability applies across the whole service area.
If you are in the area and want to confirm coverage at your address, call (470) 995-4495 and we will tell you what the schedule allows.
Chamblee's housing stock includes a mix of older single-family homes, newer construction, and multi-unit residential buildings, and the calls reflect that range. Aging equipment that has run through many regional summers, ductwork that was never balanced for the actual layout, and humidity-related comfort problems that the air conditioner alone does not resolve are among the most common situations. Describing what the property is doing on the call is the fastest way to figure out which category applies.
Ice on the outdoor coil in heating mode can be normal during a defrost cycle, but ice that does not clear, or ice on the refrigerant lines running to the indoor unit, usually points to low refrigerant, a dirty evaporator coil, or an airflow restriction. Running the system with ice present can damage the compressor, so it is worth calling before continuing to operate it.
Yes. Rental homes, apartment units, and multi-unit residential buildings are handled alongside single-family homes and commercial properties. If a landlord or property manager is coordinating access or working around a tenant's schedule, that is worth mentioning on the call so the visit can be planned accordingly. The price is confirmed before anything is scheduled, regardless of the property type.
Yes. Air quality equipment requires its own maintenance, including filter replacement and UV lamp changes, and that can be scheduled as a standalone visit. The service interval depends on the specific equipment, and that is part of the conversation when the visit is booked.
Weak airflow is most often caused by a clogged filter, a dirty evaporator coil, a blower motor that is losing output, or a duct restriction. Any of those can reduce how much conditioned air reaches the living space without triggering an obvious fault code. A service visit covers blower performance, coil condition, and duct pressure as part of the airflow diagnosis.
Yes. Documentation for the installed equipment, including the manufacturer materials that come with the unit, is left with the property owner at the end of the job. If you have questions about what was installed, those can be answered on the call as well.
Coverage is based on the address, not the town name, and a property near a town boundary is worth asking about directly.
Call (470) 995-4495 with the address and we will confirm whether it falls within the service area before anything is scheduled.
You do not need to know what is wrong before you call. The symptoms you describe on the phone shape what gets brought out. Whether the system is making a noise it did not used to make, a room that should be comfortable is not, or the equipment has stopped responding entirely, that description is enough to scope the visit and confirm a price before anyone comes out.
Call (470) 995-4495 any day from 7:30 AM to 9:00 PM.
We take residential and commercial calls across Chamblee and the surrounding area. Residential HVAC. Commercial HVAC. One number for both.
Also close at hand: Brookhaven, Dunwoody, Sandy Springs. Take a look at our map of towns.
From a single-room comfort problem to a full system replacement, we cover the heating and cooling work that Chamblee homes and businesses need across every season. The table below lays out what each service involves, who it fits best, and what is practical to know before you call. Every job starts with a clear conversation about what the equipment is doing and what it will take to address it.
| HVAC Service | What the Service Includes | Common Needs | Things to Know |
|---|---|---|---|
| Emergency HVAC Service | Scoping happens on the call before anything is scheduled.No-heat and no-cool calls acceptedPrice confirmed before schedulingService available every day 7:30 AM to 9:00 PM | A system that has stopped working entirely during hot Georgia summers or cold winter nights | Describing what the system is doing when you call helps scope the visit and confirm what parts or equipment may be needed |
| Ductwork Repair & Sealing | Duct inspection for leaks and disconnectionsSealing at joints and connectionsAirflow balancing across supply and return | Homes with uneven room temperatures, high energy bills, or a system that runs longer than expected | Leaking ducts lose conditioned air into unconditioned spaces like attics and wall cavities before it reaches the living area |
| Full System Installation & ReplacementMost Popular | Load calculation for correct sizingOld equipment removalNew system installation and commissioningRefrigerant, airflow and controls all checked before sign-off | Systems past their useful service life or requiring repairs that approach the cost of replacement | Correct sizing at installation determines how efficiently the system runs for its entire service life |
Call (470) 995-4495 to get a straight answer on what the job involves and what it will cost before anything is scheduled.
(470) 995-4495